346 Quad Hole Jig MK3

The updated 346-hole jig has had a rethink to add more holes in additional spaces.  Now we have added the 80mm and 96mm. We have also added alignment pin threaded holes to allow the jig to be rested against the edge of the sheet material to start the holes from the edge of a board without starting with the jig in an already placed hole. These holes will allow for the making of an MFT table from scratch.  The pin holes are set back in 16mm increments.

With our new MK3 346 (32mm, 48mm, 64mm, 80mm, 96mm ) offset hole jig, You can easily and accurately achieve this in minutes. 

With a 30mm guide, bush/copy ring and a 20mm router bit, fit the jig to the desired distance in the existing holes, evenly tighten the quad bases and plunge. 

What you will receive
1 x The MK3 Jig Plate
2 x 20mm Quad Bases
3 x Pins
2 x M6 x 25 Countersunk fixings
1 x 4mm Hex Key

Please Note:
•Our MK3 346 Quad Hole Jig is a non-returnable product.
•The 30mm Guide Bush is not included with the 346 Hole Jig.