Benchdog CSC SYS Fence Kit – Precision Cross-Cut System
If you own a Festool CSC SYS Table Saw, you’ll know how challenging it can be to achieve accurate and repeatable cross-cuts.
The Benchdog CSC SYS Fence Kit solves that problem with a machined aluminium adaptor plate, allowing you to securely connect Benchdog CSC Fences to your saw for flawless precision and consistency.
Each fence features laser-engraved scale markings set at 1mm intervals and offset 1mm from the blade for safe, accurate referencing. With available fence lengths of 330mm, 625mm, and 990mm, you can customise your setup for any project. The 625mm and 990mm kits include a material support plate with a dial-in thumbscrew for perfect workpiece alignment.
Proudly Made in Britain from anodised aerospace-grade aluminium, this kit embodies Benchdog Tools’ reputation for precision woodworking tools built to last.
Key Features
- Designed for the Festool CSC SYS Table Saw
- Enables accurate, repeatable cross-cuts
- Includes marked fences with laser scale and flag stops
- Compatible with multiple fence lengths (330mm / 625mm / 990mm)
- Includes a material support plate and guard lifter
- Precision-machined anodised aluminium adaptor plate
- Proudly Made in Britain
Kit Options
330mm Fence Kit
- 1 × Machined Aluminium Adaptor Plate (Anodised Black)
- 1 × Fence 330mm
- 1 × Flag Stop (Red, Green, or Blue) or Micro Flip Stop
- 1 × 3D-Printed Guard Lifter
- 2 × Stainless Steel Thumbscrews
- 2 × M6 T-Nuts
- 1 × M6 × 25 Thumbscrew
- 1 × M6 Calibration Screw with M6 T-Nut
625mm Fence Kit
- 1 × Machined Aluminium Adaptor Plate (Anodised Black)
- 1 × Fence 625mm
- 1 × Flag Stop (Red, Green, or Blue) or Micro Flip Stop
- 1 × 3D-Printed Guard Lifter
- 2 × Stainless Steel Thumbscrews
- 2 × M6 T-Nuts
- 1 × Material Support Plate with Fixings
- 1 × M6 × 25 Thumbscrew
- 1 × M6 Calibration Screw with M6 T-Nut
990mm Fence Kit
- 1 × Machined Aluminium Adaptor Plate (Anodised Black)
- 3 × Fence 330mm Sections
- 1 × Flag Stop (Red, Green, or Blue) or Micro Flip Stop
- 1 × 3D-Printed Guard Lifter
- 2 × Stainless Steel Thumbscrews
- 2 × M6 T-Nuts
- 1 × Material Support Plate with Fixings
- 1 × M6 × 25 Thumbscrew
- 6 × Joining Bars & Hex Key
- 1 × M6 Calibration Screw with M6 T-Nut
990mm Fence SYS Kit
- 1 × Machined Aluminium Adaptor Plate (Anodised Black)
- 1 × Fence 990mm (supplied as 3 × 330mm sections)
- 3 × Flag Stops (Red, Green, or Blue) or Micro Flip Stops
- 1 × 3D-Printed Guard Lifter
- 2 × Stainless Steel Thumbscrews
- 2 × M6 T-Nuts
- 1 × Material Support Plate with Fixings
- 6 × Joiners
- 1 × M6 × 25 Thumbscrew
- 1 × Tanos M112 with Foam Insert
- 1 × M6 Calibration Screw with M6 T-Nut
Please note: The 1mm Setup Block featured in our demonstration video is not included and can be purchased separately.
Minimum blade height for guard lift operation: 36mm.
⚠️ Safety Warning – CSC Fence System ⚠️
When using fences longer than 625mm, there’s an increased risk of saw tipping.
To ensure safe operation:
- Always secure your saw firmly before use
- Operate on a flat, stable surface
- Support long workpieces with additional stands
- Keep fences aligned and locked in position
- Avoid excessive side pressure during cutting
Failure to follow these safety steps may cause instability or reduced cutting accuracy.
Recommended Accessories
1mm Setup Block
Benchdog Flag Stops
