Sauter OFL3.0 Pivoting Router Lift

Sauter OFL3.0 Pivoting Router Lift

Bring professional-level routing flexibility to your workshop with the Sauter OFL3.0 Pivoting Router Lift — a precision mechanical router lift designed for router motors with a 43 mm Euro neck.

Unlike a standard router lift, the OFL3.0 features an integrated pivoting mechanism, allowing the router motor to tilt from -5° to 50°. This opens up a much wider range of routing possibilities directly from your router table, including chamfers, angled grooves, mitres, rebates, bevels and more.

Built from high-quality aluminium and steel, the OFL3.0 is designed for smooth, accurate and repeatable cutter height adjustment. Height adjustment is made from above the table using the rotary handle, while angle locking and centring are controlled from below the table using easy-access levers. The lift also features classic snap-in angle points at 22.5°, 30°, 45° and 90°, making common angled cuts quick and repeatable. (sauter)

The OFL3.0 uses a robust anodised aluminium insert plate measuring 306 x 229 x 9 mm, making it suitable for many router table builds and upgrades. With fine height adjustment to 1/10 mm, magnetic reduction plates, pre-drilled mounting holes and laser-marked millimetre scaling, it is a premium choice for woodworkers looking for accuracy, control and versatility in their router table setup. (sauter)

Perfect for furniture making, cabinet work, joinery, moulding, profiling and angled routing, the OFL3.0 gives you the flexibility of a professional spindle moulder-style setup in a compact router table format.

Key Features

• Precision mechanical pivoting router lift for router table use

• Designed for router motors with 43 mm Euro neck

• Pivoting adjustment from -5° to 50°

• Snap-in angle points at 22.5°, 30°, 45° and 90°

• Fine height adjustment to 1/10 mm

• Height adjustment from above the table

• Angle locking by lever below the table

• Centring adjustment via two lower levers

• No loss of routing depth when pivoting

• Easier cutter changes thanks to upward-facing spindle and collet access

• Solid aluminium and steel construction

• Smooth-running columns for accurate height adjustment

• Magnetic reduction plates for safer, cleaner cutter openings

• Laser-marked millimetre scale for accurate fence alignment

• Levelling screws allow the plate to sit flush in the table

• Pre-drilled countersunk mounting holes for quick installation

• Starter pin holes for freehand routing curved workpieces

• Suitable for grooves, rebates, chamfers, mitres, bevels and angled routing work

Technical Specifications

Compatible Router Motors

The OFL3.0 is designed for selected router motors with a 43 mm clamping neck.

Approved compatible models include:

• AMB / Kress: 530 FM, 800 FME, 1050 FME

• Mafell: FM 800, FM 1000

• Suhner: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAK 30 RF SPZ12

Please note: the Mafell FM1650PV-LO is not compatible. Always check your router motor neck size and manufacturer tolerances before ordering. (sauter)

What’s Included

• 1x Sauter OFL3.0 Pivoting Router Lift

• 2x magnetic long-hole reduction plates, 16 mm and 32 mm

• 1x magnetic reduction plate, 68 mm

• 1x 5 x 150 mm hex screwdriver

• 4x M6 x 50 fixing screws with washers and nuts

• 8x M5 x 8 levelling screws

• 1x English instruction manual

Ideal For

• Precision router table work

• Angled grooves and bevels

• Chamfers and mitre cuts

• Rebates and profiles

• Cabinet making and furniture making

• Professional woodworking workshops

• Compact workshops needing maximum routing flexibility

SEO Meta Description

Upgrade your router table with the Sauter OFL3.0 Pivoting Router Lift. Designed for 43 mm Euro neck router motors, with -5° to 50° pivoting, 1/10 mm fine height adjustment, magnetic reduction plates and a 306 x 229 mm aluminium insert plate.

Shopify Product Page Title

Sauter OFL3.0 Pivoting Router Lift for Router Tables

Suggested URL Handle

sauter-ofl3-router-lift

Short Product Description

The Sauter OFL3.0 Pivoting Router Lift is a precision mechanical router lift for 43 mm Euro neck router motors. With a pivoting range from -5° to 50°, snap-in angle points, fine height adjustment to 1/10 mm and a robust 306 x 229 mm aluminium insert plate, it brings professional angled routing capability to your router table setup.